Sierra SRF-35/40 Tube Fired Gas Fryer

Model #SRF-35/40 By Sierra
$899.35
Save $783.65
$1,683.00

Free Shipping!

Ships in 24 - 48 Hours From 1 of

4 Locations? Miami, Fl (33181)
Carteret, NJ (07008)
Dallas, TX 75001
Compton, Ca (90059)

The Sierra SRF-35/40 Tube Fired Gas Fryer

The Sierra all-purpose fryers feature outstanding reliability and durability, capable of cooking a wide variety of fried foods with consistent uniformity and great taste.

Three highly efficient cast iron burners and stainless steel tubes create a large heat ransfer area for even heat distribution. Our durable temperature probe senses temperature changes and activates a quick burner response. The temperature for the SRF-35/40 ranges from 200°F (93°C) to 400°F (204°C). includes Millivolt safety control system.

Every inch of the frypot and cold zone can be cleaned and wiped down by hand. The large cold zone and forward sloping bottom help collect and remove sediment from the frypot to safeguard oil quality and support routine frypot cleaning.

  • 90,000 BTUs/hr
  • 6” swivel casters are optional.
  • Part #: 119-0021 ( Set of 4, 2 locking and 2 non-locking).
  • Gas Connection: 3/4” NPT on the right-hand rear of the appliance.
  • Gas pressure: 4” W.C. - Natural Gas | 10” W.C. - Propane
  • Clearances: Combustible: 6 inches sides, 6 inches rear, 16 inches to adjacent open flame burner units | Non-combustible: 0 inches sides, 0 inches rear, 16 inches to adjacent open burner flame units. Specify type of gas and altitude, if over 2,000 feet, when ordering. When placing an order, please specify your preferred conguration; for LP (SRF-35/40LP) or for Natural Gas (SRF-35/40NG)
  • 90,000 BTUs/hr.
  • Large cold zone area.
  • Delivers heat through 6” x 2” 16-gauge stainless steel heat exchange tubes for even heat transfer and rapid temperature recovery
  • Frypot is manufactured from 439 grade stainless steel
  • 1.25” stainless steel full port ball type drain valve.
  • Stainless steel door is reinforced for added strength with a heavy duty magnetic door catch.
  • Stainless steel front. Galvanized side and back panels.
  • Twin fry baskets with plastic coated handles. Stainless steel basket hanger, easily removable for cleaning.
  • Robertshaw snap action millivolt thermostat control adjusts from 200°F-400°F. No electrical hook-up required.
  • Hi-limit shut-off protector shuts off gas combination valve and standing pilot.
  • Built-in ue deflector.
  • Nickel-plated tube rack.
  • Set of four stainless steel adjustable legs.
  • The SRF-35/40 is shipped from the factory, configured for either natural gas or LP installation.

Warranty:

12 months parts & labor. Additional fry tank warranty to the original purchaser only: If the fry tank has leaked because of a manufacturing defect, as confirmed by an MVP Group servicer within the first two years of operation, MVP Group shall replace the fryer. Refer to Operators Manual for full details. Freight or installation charges shall not be included. Gas Connection: 3/4” NPT on the right-hand rear of the appliance.

Specifications
Equipment Type Fryers
Brand Sierra
Model Number SRF-35/40 (NG/LP)
Number of Burners 3
Fryer Capacity 35-40 lbs
BTU (Each Burner at 5” W.C) 30,000
Total BTU 90,000
Dimensions
Width 15.5"
Height 45.8"
Depth 31.1"
Shipping Weight 168 lbs.
>CSA Certified CSA Certified

This product was tested and has met the Canadian Standards Association certification requirements for electrical, plumbing and/or mechanical products.

>CSA Certified Design CSA Design Certified

This product was tested and has met the certification requirements for gas-fired products.

>CSA Gas Standards Certified CSA Gas Standards Certified

This product is certified by the Canadian Standards Association for Gas Standards.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

 

You recently viewed

Clear recently viewed
}