Revent Four Deck Two pan Electric Deck Oven

Model #REVENT-Deck-Oven-4d2p By Revent
$45,305.00
Save $7,995.00
$53,300.00

Free Shipping!

Ships in 24 - 48 Hours

The Revent Deck Oven

Utility Requirements

Electrical

Power supply options, 1 power feed per deck or 1 comon supply (up to 3 Decks). 4 Deck ovens require 2 separate power feeds as shown in the table above. «4 wire» 3PH power supplies required. The stated power consumption is FLA 3PH208V. Minimum fuse size is dictated by local code. Contact factory for other power options.

Ventilation

Direct Venting:

Consult with local code officials as some may not allow direct venting for Deck ovens! There are (2) 4” vent connections. One in the front at the center of the integrated eybrow hood and the other in the left hand rear corner (damper vent). Ducting and fan to be provided by customer per local and state codes. Draft of 250 cfm per deck is required.

Venting via external exhaust hood:

Oven installed under an exhaust hood designed to vent by products steam and vapor from the oven. Type of products baked and local code dictates if the exhaust hood should be a Type II (normal baking) or Type I (grease laden vapor) exhaust hood.

Water and Drain

Water Supply: 1/2” ø 35-45 PSI, cold
Drain: 32 mm
Water quality/ Chemical analysis: Revent Int. requirement
Magnesium, Mg: <30 mg/ml
Calcium, Ca: 20 - 100 mg/l
Hardness: 4,0 - 7,0 dH
pH at 20˚C: 7,5 - 8,5 pH
Alkalinity: >60 m/l
Chlorides: 10mg/l
Conductivity: 200 - 800 mS/cm

Installation requirements

The oven should be installed on a levelled floor.

Optional

480V power supply available for all models
Proofer base
Extra pull-out bottom shelf.

  • Superb artisan quality of the baked product with porus natural clay hearth stones
  • 3 zone heat regulation making it easy to adjust the baking profile of the oven and get even bakes
  • Temperature range up to 752° F for flatbread
  • Wide variety of sizes rendering a more 
  • efficient use of floor space. 
  • Programmable easy to use touch control panel. 
  • Automatic dampers 
  • Auto start 
  • Ergonomic and safe handles. 
  • Optimized energy efficiency through Individually controlled decks and Heat reflecting glass windows 
  • Low service costs. 
  • Quick and easy installation.
  • Flexible power supply.
  • Convenient bottom shelf for easy reach of supplies.
  • Pull-out shelf supporting loading process just when you need it.
  • Oven legs with castors enabling easy cleaning
  • Corrosion resistant steam system.
Specifications
Max heating capacity Inc control voltage & steam generator 25+8.4 kW
Amps 73+25A
Dimensions
External measures 58.3” W x 35.6” D x 78.6” H
Internal measures 42.0” W x 28.0” D x 9.6” H
UL Listed in US & Canada UL Listed in US & Canada

This product meets UL safety standards in compliance with both Canadian and U.S. requirements.

NSF Listed NSF Listed

This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

 

You recently viewed

Clear recently viewed
}