Hydra-Kool KPM-CG-60-R 60" Curved Glass Deli and Packaged Meat Display Case, Remote
Intertek ETL Listed US & Canada
The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Hydra-Kool KPM-CG-60-R 60" Curved Glass Deli and Packaged Meat Display Case, Remote
Free Shipping!
Ships in
24 - 48 Hours
From 1 of 3 Locations?
Plattsburgh, NY (12901)
Dallas, TX (75001)
Compton, Ca (90059)
Hydra-Kool KPM-CG-60-R Curved Glass Deli and Packaged Meat Display Case
These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R404a refrigerant. Alternate refrigerants are available by special order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills at the front and back cannot be blocked. B.T.U.’s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are provided with an expansion valve and a liquid solenoid for the pump down cycle. In remote cases, if no floor drain is provided, a condensate evaporating pan must be ordered and 3.3 amps added to the amp load. Remote cases must be hard-wired – no plugs.
- Case holds 33°F to 40°F
- Forced air refrigeration
- Tempered tilt-out curved front glass tempered side glass and rear doors
- Refrigerated rear storage cases can be multiplexed
Optional Features
- Lift up front glass
- Stainless steel interior and/or exterior
- Other colors available
- White epoxy bi-level wire racks; 2 or 3-level step sham
- Scale stand with a receptacle
- Cutting board
- Knife support
- Joining Kit
- Partition
- Condensate evaporating pan
- Casters add 4-3/8” to the height
- Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
- Tempered side glass
- CFC-free injected foam insulation
- Silver colored PVC coated steel front panel
- PVC-coated steel gray interior
- Black steel kick plate
- Foamed polystyrene black end panels
- Tempered tilt-forward front glass
- Rear workbench
- Removable rear tempered glass sliding doors
- Tempered glass inside the shelf is NON-REFRIGERATED
- LED lighting in the canopy
- Temperature and defrost are regulated by a digital controller
- Removable condensate evaporating pan for easy cleaning on self-contained units
- Slide out condensing unit on self-contained units
- Anti-condensate system for front glass
- Digital thermometer
- Leveling feet
Warranty
1-year parts and labor.
| Specifications | |
| O.A. Length | 60" |
| Number of Rear Doors | 1 |
| 115 Volts Total Amps | 0.97 |
| B.T.U | 2959 |
| No Crate Weight | 414 lbs. |
| With Crate Weight | 637 lbs. |
| Dimensions | |
| Width | 60" |
| Depth | 43.38" |
| Height | 49.38" |
| Weight | 637 lbs. |
Intertek ETL Listed US & Canada
The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
