Hydra-Kool KFM-SO-50-S 52" Open Front Seafood Display Case, Self-Contained
Hydra-Kool KFM-SO-50-S 52" Open Front Seafood Display Case, Self-Contained
Free Shipping!
Ships in
24 - 48 Hours
From 1 of 3 Locations?
Plattsburgh, NY (12901)
Dallas, TX (75001)
Compton, Ca (90059)
Hydra-Kool KFM-SO-50-S Open Front Seafood Display Case
These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R404a refrigerant. Alternate refrigerants are available by special order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills at the front and back cannot be blocked. B.T.U.’s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are provided with an expansion valve and a liquid solenoid for the pump down cycle. Remote cases must be hard-wired – no plugs.
- Case holds 33°F to 40°F
- Low-velocity forced-air refrigeration maintains high humidity tempered front and side glass
- Cases can be multiplexed integrated, non-removable heavy-duty ice pan
- Cases require floor drains
Optional Features
- Stainless steel exterior
- Other colors available
- Joining Kit
- Partition
- Scale stand with a receptacle
- Cutting board
- Knife Support
- Casters add 4-3/8” to the height
- Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
- Coated evaporator coil
- Integrated, non-removable heavy-duty ice pan Stainless steel frame
- Stainless steel interior
- Stainless steel rear workbench
- Silver colored PVC coated steel front panel
- CFC-free injected foam insulation
- Black steel kick plate
- Foamed polystyrene black end panels
- Temperature and defrost are regulated by a digital controller
- Slide out condensing unit on self-contained units
- Digital thermometer
- Leveling feet
Warranty
1-year parts and labor.
Specifications | |
O.A. Length | 52-1/8" |
Volume FT3 | 8.00 |
Compressor | 1/2 H.P / 9.6 F.L.A |
LIGHTS Fans HTRS | 0.65 |
Total Amps | 10.25 |
NEMA 115 V Plug | 5-15P |
No Crate Weight | 322 lbs. |
With Crate Weight | 505 lbs. |
Crate Size | 59"L x 44"W x 42"H |
Dimensions | |
Width | 52.63" |
Depth | 42.75" |
Height | 46.13" |
Weight | 505 lbs. |
The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
The plug type for this product is NEMA 5-15P.