Amerikooler QF081077 Dynasty Walk-in Freezer, 8' x 10' x 7' 7", Indoor, With Floor, Remote Condenser, Fast Shipping

Modular Panel Construction with Airtight Joints.

Dynasty modular wall, floor, and ceiling panels are fabricated in the Amerikooler plant using state of the art robotic manufacturing and assembly processes; for precise fit, easy assembly and log life. Dynasty panels are 4” thick and manufactured with 100% uniform AK-XPS4 rigid foam. That insulation is permanently bonded to primed metal surface, to form a non-deteriorating structurally-rigid panel.

Dynasty panel assembly is accomplished with a time tested, corrosion resistant cam action locking system, and a factory installed NSF compliant compression gasket, to form rigid, airtight joints

Acrylume Stucco Embossed Panel Finish

Dynasty wall and ceiling panel interiors and exteriors are laminated with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic pains.

AK-XPS4 Long Life Extruded Foam Insulation

AK-XPS4 rigid foam is a closed cell, void-free hydrophobic (water resistant) material that maintains the highest possible R-value over time, to ensure ling term energy efficiency. AK-XPS4 meets and exceeds the EISA Energy Independence & Security Act of 2007 with R-32 value for freezers. Amerikooler AK-XPS4 insulation is backed by the Dow Chemical Company with a 50 year thermal warranty

Strong Floor Construction

Dynasty floor panels are also 4” thick and manufactured using heavy gauge smooth aluminum, rated to support 600 pounds per-square-foot of uniformly distributed floor load. The include a ½”-radius cove along the interior perimeter, to make cleaning easier.

Flush Door Hardware

Standard door sizes are: 36”, 30”, or 26” wide, all with a 76” high clear opening. Doors are constructed with 4” thick AL-XPS4 rigid foam insulation and finished with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic paint.

Each door includes: two heavy duty, super cam-rise spring-assisted hinges, a heay pull handle with key lock and inside safety release, and a door closer is provided for extra positive smooth closing. To ensure a positive seal, the door includes a three sided magnetic gasket and a flexible double wiper at the bottom edge of the door.

Fast & Easy Assembly

Amerikooler panels are designed so that job-site installation is fast and easy. All walk-ins are shipped with a hardware and installation instruction kit that includes: the shop drawing, detailed installation instructions, hex wrench for camlock panel assembly, PVC press fit caps and the light globe

Door Jamb

The door jamb and door are constructed with a non-conductive heavy-duty PVC extrusion that provides a thermal barrier. The jamb includes an incandescent vapor-proof light fixture mounted on the center/top of the jamb, which provides extra space for shelving posts. A digital LED thermometer is provided with On/Off pilot light

Dynasty freezer doors are equipped with a heated pressure relief vent mounted on the door jamb. In addition, the doors include a temperature controlled heater wire to ensure a positive frost free seal.

• 4” thick AK-XPS4 insulation with R-values of R-29 for coolers and R-32 for freezers
• Insulation provides exceptional moisture resistance and long-lasting structural integrity for panels
• 26 gauge Acrylume® coated corrosion resistant stucco embossed Galvalume on all interior and exterior surfaces
• 30”W x 76”H or 36”W x 76”H flush mounted door
• 2 super cam-rise spring assisted hinges
• Deadbolt keyed handle latch
• Interior safety lock release handle
• Spring actuated door closer
• Digital LED thermometer with on and off pilot light switch
• Vapor proof light fixture centered on interior door jamb
• Smooth aluminum floor finish rated at 600 Lbs. per sq. ft. of uniformly distributed load
• Freezer door with temperature regulating thermostat and mounted and pre-wired PRV

Features

• Interior walls: 26 Ga. Stucco Embossed Acrylume
• Exterior walls: 26 Ga. Stucco Embossed Acrylume
• Interior ceiling: 26 Ga. Stucco Embossed Acrylume
• Exterior ceiling: 26 Ga. Stucco Embossed Acrylume

Insulation:

• 4" thick AK-XPS4 Ultra extruded foam with R-value of R-32(with a 50 Year Thermal Warranty.)
• UL Classified Core Flame Spread 15, Smoke Rating less than 165.

Temperature:

-10°F

Floor Type:

• Type 1B
• Application: Foot Traffic - No Rolling Carts
• NSF Floor panel rated for 700 LBS/ SQ. FT.
• 22 Ga. Stainless Steel Integral - Not Reinforced

Door:

• (1) Standard 36" x 76" Left hinged flush door with brushed hardware.
• Interior & Exterior finish: 26 Ga. Stucco Embossed Acrylume.
• Energy saving temperature regulating thermostat heater wire and heated relief vent.
• Heavy duty deadbolt handle latch.
• Digital LED Thermometer with pilot light switch.
• 1807 11w, Vapor Proof, 120V. LED fixture. 82 Lumens /watt Angled face . Requires 115vac. 2.2 amps.

Equipment:

• (1) 2 1/2 HP Bohn Outdoor Condensing Unit, Model BHT025L6BF, 208-230/60/1, MCA 29 Amps, Low Temperature, Hermetic, Air-cooled, R404A, 1 year compressor and parts warranty from date of shipment within Continental USA. (8300 Btu/hr @ -10°F room temperature and 95°F ambient)
• (1) Bohn LET090BEWMC6K, 208-230/60/1, low profile electric defrost evaporator, 1 Amps with EC motor, Includes Mounted TXV, LLSV & Thermostat

Warranty

• 50 Year Thermal Warranty
• 15 Year Panel Warranty
• 5 Year Doors & Floors Warranty
• 1 Year Compressor & Parts Warranty
• 1 Year Labor Warranty
• Optional 4 year extended compressor warrany available (information upon request)