Translation missing: en.general.accessibility.skip_to_content

Free Shipping    ✔ Easy Returns    ✔ Price Match Guarantee

Amerikooler QC080877 Dynasty Walk-in Cooler, 8' x 8' x 7' 7", Indoor, With Floor, Remote Condenser, Fast Shipping

Amerikooler QC080877 Dynasty Walk-in Cooler, 8' x 8' x 7' 7", Indoor, With Floor, Remote Condenser, Fast Shipping

Model #QC080877 By Amerikooler
Save $1,000.00
Translation missing: en.product.item.price.original $9,899.00
Translation missing: en.product.item.price.current $8,899.00

Free Shipping!

Ships in 24 - 48 Hours From Hialeah, FL

Modular Panel Construction with Airtight Joints.

Dynasty modular wall, floor, and ceiling panels are fabricated in the Amerikooler plant using state of the art robotic manufacturing and assembly processes; for precise fit, easy assembly and log life. Dynasty panels are 4” thick and manufactured with 100% uniform AK-XPS4 rigid foam. That insulation is permanently bonded to primed metal surface, to form a non-deteriorating structurally-rigid panel.

Dynasty panel assembly is accomplished with a time tested, corrosion resistant cam action locking system, and a factory installed NSF compliant compression gasket, to form rigid, airtight joints

Acrylume Stucco Embossed Panel Finish

Dynasty wall and ceiling panel interiors and exteriors are laminated with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic pains.

AK-XPS4 Long Life Extruded Foam Insulation

AK-XPS4 rigid foam is a closed cell, void-free hydrophobic (water resistant) material that maintains the highest possible R-value over time, to ensure ling term energy efficiency. AK-XPS4 meets and exceeds the EISA Energy Independence & Security Act of 2007 with R-29 value for Coolers. Amerikooler AK-XPS4 insulation is backed by the Dow Chemical Company with a 50 year thermal warranty

Strong Floor Construction

Dynasty floor panels are also 4” thick and manufactured using heavy gauge smooth aluminum, rated to support 600 pounds per-square-foot of uniformly distributed floor load. The include a ½”-radius cove along the interior perimeter, to make cleaning easier.

Flush Door Hardware

Standard door sizes are: 36”, 30”, or 26” wide, all with a 76” high clear opening. Doors are constructed with 4” thick AL-XPS4 rigid foam insulation and finished with 26-gauge zinc-aluminum (Acrylume) coated steel, which is stucco embossed and coated with corrosion resistant acrylic paint.

Each door includes: two heavy duty, super cam-rise spring-assisted hinges, a heay pull handle with key lock and inside safety release, and a door closer is provided for extra positive smooth closing. To ensure a positive seal, the door includes a three sided magnetic gasket and a flexible double wiper at the bottom edge of the door.

Fast & Easy Assembly

Amerikooler panels are designed so that job-site installation is fast and easy. All walk-ins are shipped with a hardware and installation instruction kit that includes: the shop drawing, detailed installation instructions, hex wrench for camlock panel assembly, PVC press fit caps and the light globe

Door Jamb

The door jamb and door are constructed with a non-conductive heavy-duty PVC extrusion that provides a thermal barrier. The jamb includes an incandescent vapor-proof light fixture mounted on the center/top of the jamb, which provides extra space for shelving posts. A digital LED thermometer is provided with On/Off pilot ligh

  • 4” thick AK-XPS4 insulation with R-values of R-29 for coolers and R-32 for freezers
  • Insulation provides exceptional moisture resistance and long-lasting structural integrity for panels
  • 26 gauge Acrylume® coated corrosion resistant stucco embossed Galvalume on all interior and exterior surfaces
  • 30”W x 76”H or 36”W x 76”H flush mounted door
  • 2 super cam-rise spring assisted hinges
  • Deadbolt keyed handle latch
  • Interior safety lock release handle
  • Spring actuated door closer
  • Digital LED thermometer with on and off pilot light switch
  • Vapor proof light fixture centered on interior door jamb
  • Smooth aluminum floor finish rated at 600 Lbs. per sq. ft. of uniformly distributed load
  • Freezer door with temperature regulating thermostat and mounted and pre-wired PRV


  • Interior walls: 26 Ga. Stucco Embossed Acrylume
  • Exterior walls: 26 Ga. Stucco Embossed Acrylume
  • Interior ceiling: 26 Ga. Stucco Embossed Acrylume
  • Exterior ceiling: 26 Ga. Stucco Embossed Acrylume


  • 4" thick AK-XPS4 Ultra extruded foam with R-value of R-29 (with a 50 Year Thermal Warranty.)
  • UL Classified Core Flame Spread 15, Smoke Rating less than 165.



Floor Type:

  • NSF vinyl screed




  • (1) Standard 36" x 76" Left hinged flush door with brushed hardware.
  • Interior & Exterior finish: 26 Ga. Stucco Embossed Acrylume.
  • Heavy duty deadbolt handle latch. Digital LED Thermometer with pilot light switch.
  • 1807 11w, Vapor Proof, 120V. LED fixture. 82 Lumens /watt Angled face .Requires 115vac. 1 amps.


  • (1) 3/4 HP Bohn Outdoor Condensing Unit, Model BHT008X6BFM, 208-230/60/1, MCA 15 Amps, BTUH 7070, Medium Temperature, Hermetic, Air-cooled, R404A, 1 year compressor and parts warranty from date of shipment within Continental USA.
  • (1) Bohn ADT070AEWMC6K, 115/60/1, low profile air defrost evaporator, 1.8 Amps with EC motor, Includes Mounted TXV, LLSV & Thermostat
Actual Width   7'-10"
Actual Length 7'-10 1/8" 
Actual Height 7'-7"
Internal width 7'-2"
internal length 7'-2 1/8"
Internal height 7'-3"


  • 50 Year Thermal Warranty
  • 15 Year Panel Warranty
  • 5 Year Doors & Floors Warranty
  • 1 Year Compressor & Parts Warranty
  • 1 Year Labor Warranty
  • Optional 4 year extended compressor warrany available (information upon request)
Made in the USA Made in the USA

This product was made in America.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

Have you ever used an AM Manufacturing S302 Dough Divider & Rounder???
It's alot of fun!
See you soon!
We will reopen at .