Hydra Kool KPM-FG-100-S Packaged Meat Flat Glass Refrigerated Deli Display Case 100"W
Intertek ETL Listed US & Canada
The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Hydra Kool KPM-FG-100-S Packaged Meat Flat Glass Refrigerated Deli Display Case 100"W
Free Shipping!
Ships in
24 - 48 Hours
From 1 of 3 Locations?
Plattsburgh, NY (12901)
Dallas, TX (75001)
Compton, Ca (90059)
The Hydra-Kool
Hydra-kool is a premier manufacturer of food merchandisers for any retail or c-store application. Combining cutting-edge engineering, innovative technology, and the best overall value in our industry, we offer solutions through an exceptional range of refrigerated display deli and bakery cases in the new flat glass or traditional curved glass design.
Optional Features
- Stainless steel exterior and / or interior
- Other colors available
- Joining Kit
- Partition
- White epoxy bi-level wire racks; 2 or 3 level step sham
- Scale stand with receptable
- Cutting Board
- Knife Support
- Condensate evaporating pan for remote cases
- Casters add 4-3/8” to height
- Stainless steel legs are adjustable from 5-1/8” to 7-5/8”
Note
These cases are engineered to operate in locations not exceeding 75°F and 55% R.H. These cases are designed to operate using R404a refrigerant. Alternate refrigerants are available by special order. O.A. length includes (2) ends at 1-1/2” each. Ventilation grills at the front and back cannot be blocked. B.T.U.’s are calculated at 14°F (evaporator) and 90°F (ambient). Remote cases are provided with an expansion valve and a liquid solenoid for the pump down cycle. In remote cases, if no floor drain is provided, a condensate evaporating pan must be ordered and 6.7 amps added to the amp load. Remote cases must be hard-wired – no plugs
- Silver colored PVC coated steel front panel
- CFC free injected foam insulation
- PVC coated steel gray interior
- Black steel kick plate
- Rear work bench
- Foamed polystyrene black end panels
- Tempered glass inside shelf is NON-REFIGERATED
- LED lighting in canopy
- Removable condensate evaporating pan for easy cleaning on self contained units
- Temperature and defrost regulated by a digital controller
- Slide out condensing unit on self-contained units
- Anti condenstate system for front glass
- Digital thermometer
- Levelling feet
Warranty
One year parts and labor with an additional four years on the compressor (part only)
| Specifications | |
| O.A. Length | 101.2 |
| Volume FT3 Front | 40.45 |
| Volume FT3 Rear | 13.41 |
| Compressor HP | 5/8 |
| Compressor F.L.A | 8.9 |
| Compressor L.RA | 47 |
| Voltage | 115 V |
| LIGHTS Fans HTRS | 4.80 |
| EVAP Pan | 3.3 |
| Total Amps | 14.23 |
| Dimensions | |
| Width | 100" |
| Height | 47.25" |
| Depth | 43.4" |
| Shipping Weight | 866 lbs. |
Intertek ETL Listed US & Canada
The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
