Sierra SRF-40/50 Tube Fired Gas Fryer

Model #SRF-40/50 By Sierra
$919.23
Save $910.77
$1,830.00

Free Shipping!

Ships in 24 - 48 Hours From 1 of

4 Locations? Miami, Fl (33181)
Carteret, NJ (07008)
Dallas, TX 75001
Compton, Ca (90059)

The Sierra SRF-40/50 Tube Fired Gas Fryer

The Sierra all-purpose fryers feature outstanding reliability and durability, capable of cooking a wide variety of fried foods with consistent uniformity and great taste.

Three highly efficient cast iron burners and stainless steel tubes create a large heat transfer area for reliable even heat distribution. Our durable temperature probe senses temperature changes and activates a quick burner response. The temperature for the SRF-40/50 ranges from 200°F (93°C) to 400°F (204°C). Includes Millivolt safety control system.

Every inch of the frypot and cold zone can be cleaned and wiped down by hand. The large cold zone and forward sloping bottom help collect and remove sediment from the frypot to safeguard oil quality and support routine frypot cleaning.

  • 6” swivel casters are optional.
  • Part #: 108-WK5B ( Set of 4, 2 locking and 2 non-locking).
  • Tube Fired: Delivering heat through tube burners of 16 gauge stainless steel for rapid temperature recovery.
  • Gas Connection: 3/4” NPT on the right-hand rear of the appliance. The pressure regulator (supplied) is to be connected by the installer.
  • Gas pressure: 4” W.C. - Natural Gas | 10” W.C. - Propane
  • Clearances: Combustible: 6 inches sides, 6 inches rear, 16 inches to adjacent open flame burner units | Non-combustible: 0 inches sides, 0 inches rear, 16 inches to adjacent open burner flame units. Specify type of gas and altitude, if over 2,000 feet, when ordering.
  • Welded 16 gauge stainless steel tank with a super smooth machine furnish ensures easy cleaning.
  • Stainless steel front, door and sides, with a galvanized back.
  • Long lasting baffles are mounted in the 3 heat exchange tubes toprovide maximum heating and combustion efficiency.
  • Standing pilot light design provides a ready flame when heat is required.
  • Integrated gas control valve acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator and automatic main valve.
  • Robertshaw snap action millivolt thermostat control adjusts from 200°F-400°F. No electrical hookup required.
  • Hi-limit shut-off protector shuts off gas combination valve and standing pilot.
  • Built-in heat deflector.
  • Two nickel chrome plated oblong wire mesh baskets, with vinyl coated heat protection handles.
  • One nickel chrome plated tube rack and drain extension.
  • 6” adjustable stainless steel legs.
  • The SRF-40/50 is shipped from the factory, ready for natural gas installation. An LP conversion kit is included with each unit.

Warranty:

  • 1 Year Parts
  • 1 Year Labor
Equipment Type Fryers
Brand Sierra
Model Number SRF-40/50
Number of Burners 3
Fryer Capacity 45-50 lbs
BTU (Each Burner at 5” W.C) 38,000
Total BTU 114,000
External Dimensions Width (including Handle) 15.5”
External Dimensions Depth (including Handle) 32.2”
External Dimensions Height (including Handle) 44.4”
Net Weight 152 lbs
Shipping Weight 167 lbs
Intertek ETL Listed US & Canada Intertek ETL Listed US & Canada

The ETL Mark is proof of product compliance to North American and Canadian safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.

ETL Sanitation Listed Intertek ETL Sanitation Listed

The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

 

You recently viewed

Clear recently viewed
}