Jet-Tech 777 Pot and Pan Washer with Built In Booster

Jet-Tech 777 Pot and Pan Washer with Built In Booster
Free Shipping!
Ships in
24 - 48 Hours
From 1 of 3 Locations?
Plattsburgh, NY (12901)
Dallas, TX (75001)
Compton, Ca (90059)
Jet-Tech Model 777
Ideal for medium scale washing applications, the 777 comes equipped with a 27.5’’ x 27.5’’ (70 cm. x 70 cm.) stainless steel basket with a 33.5" (85 cm.) door opening. The basket’s easy slide guides greatly reduce the effort of their movement for the operator. Three automatic programs ranging up to ten minute cycle lengths.
Total Clean Concept
Both our 777 & 787 pot, pan and utensil washer series are equipped with deep-drawn inner tanks without welds; which fully complies with the most extreme sanitary rules. The double integrated waste filters retainn the largest particles, then ncarried to collection baskets which are easily removed. Lastly, then internal pumps are self-draining in order to avoid any odors when the machine is shut off.
CRP
CRP is the technology developed for end-users that expect absolute perfection. The CRP rinse permits you to enjoy the consistent quality results obtained; as the rinse water’s temperature will not change for the total cycle duration. The water capacity and pressure are guaranteed by a built-in booster; not directly supplied from the incoming water line; but through an intermediate holding tank with a rinsing pump also nlocated within the machine body as standard equipment.
Helping Personnel
Our pot/pan washers will ease the tedious cleaning operations at the end of the day thanks to the Total Clean Concept. Operation is intuitive and machine control is made through a soft touch low tension electric panel with few push buttons, clear pilot lights and digital display to see the washing and rinsing temperatures. The same display also shows the self-diagnostic system’s messages which control the main electric components.
Ensuring Hygiene
The guarantee of a rinse always at a sanitation temperature is given by the sophisticated electronic Thermostop that doesn’t permit the start of this crucial phase if the water isn’t at the correct temperature. The double-walled construction and the particular washing circuit’s architecture allows for extraordinary silent operation. The reduction of the consuption of water and chemicals products decreases the impact of every single cycle on the environment. We allow you to comply withm HACCP requirements in an easy and economical way.
Warranty
1 year parts and labor.
- Thermostop - If correct rinse temperature (176°F.-184°F) has not been reached, wash cycle is extended.
- Ensures correct rinse temperature.
- Quick Ready - Enables tank filling with hot water coming from booster.
- Machines reaches faster working temperature.
- CRP System - Ensures constant rinse pressure and temperature.
- Optimum rinsing results.
- Automatic start - When door is closed, cycle starts automatically.
- Easy operation.
- Cycle counter (partial and total) - Counts working cycle of the day and cumulative working cycles to the date.
- Useful for chemical companies and end user
- Half load function (787) - It is possible to use half machine (only model 787) having two separate washing and rinsing systems. Machine will indicate that right hand side only is working.
- Avoids unnecessary operating costs in case of low output requirements.
Specifications | |
Equipment type |
Pan Washer |
Brand | Jet-Tech |
Rack capacity | 27.55" x 27.55" (70 x 70 cm) |
Door opening | 33.46" (85 cm) |
Washing time program | 141-291-561 seconds |
Pause time program | 16 seconds |
Rinsing time program | 23 seconds |
Total cycle | 180-330-600 seconds |
Tank temperature | 165°F |
Booster Temperature | 190°F |
Tank capacity | 17.96 gal (68 litres) |
Booster capacity | 3.17 gal (12 litres) |
Water consumption | 1.60 gal (6,1 litres) |
Fill water temperature | 59°F (15°C) - 149°F (65°C) |
Fill water pressure | 18-40 lbs (1-3 bar) |
Fill hose connection | G 3/4" M |
Drain hose diameter | 1.5" (38 mm) |
Motor | 4 H.P. |
Voltage | 208V 3phase 60 hz |
Amperage | 36A |
Tank | 8000W |
Booster | 8000W |
Washing pump | 3000W |
Rinsing pump | 250W |
Total load | 11250W |
Software systems | Thermostop System; Quick Ready System; CRP System; Automatic Start; Cycle Counter (partial and total) |
Standard | Autodrain wash pump; Stainless steel wash arms; Double walled insulated body; Double filter drain system |
Optional equipment | Detergent dispenser; Low level detergent sensor; Rinse-aid dispensing pump; Low level rinse sensor |
Dimensions | |
Width | 33.5" |
Height | 75" |
Depth | 33.5" |
Shipping Weight | 450 lbs. |

The CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.

The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.