Hoshizaki KM-301BWJ Crescent Cuber Ice Maker, Water-Cooled, Built in Storage Bin, Undercounter
ADA Compliant
The Department of Justice (DOJ) published the Americans with Disabilities Act (ADA) Standards for Accessible Design in September 2010. These standards state that all electronic and information technology must be accessible to people with disabilities.
AHRI Certified
Widely recognized as the gold-standard for heating and cooling certification, AHRI provides an accurate and unbiased evaluation of heating, ventilation, air conditioning and commercial refrigeration (HVACR) equipment. With over 80 years’ experience certifying heating and cooling hardware, the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) is an internationally recognized certification standard. ANSI/AHRI standards benefit the HVAC and Refrigeration industry by ensuring the performance and efficiency of manufactured equipment is accurate and reliable.
CE Certified
The CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
UL Listed in US & Canada
This product meets UL safety standards in compliance with both Canadian and U.S. requirements.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
NSF Listed
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made in the USA
This product was made in America.
Hoshizaki KM-301BWJ Crescent Cuber Ice Maker, Water-Cooled, Built in Storage Bin, Undercounter
Free Shipping!
Ships in 24 - 48 Hours
The Hoshizaki KM-301BWJ Crescent Cube Ice Maker
The KM-301BWJ is capable of producing approximately 265 lbs of crescent cubed ice. This Undercounter Water-cooled, Built in Storage Bin icemaker stores up to 100 lbs of ice*, which makes it ideal for small bars, hotel lobbies, and office break rooms. It features the CycleSaver™ design and includes the EverCheck™ alert system making the unit simple to maintain. The KM-301BWJ requires a Single phase, 115v/60/1, 6.5 ft cord with NEMA 5-15 plug electrical connection. Front in, front out airflow. Please consult the Specification Sheet for additional details.*Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice. Replaces KM-300BWJ.
Electrical Specification:
- Single phase
- 115v/60/1
- 6.5 ft cord with NEMA 5-15 plug
- Amperage: 5.7
- Max Fuse/HACR Breaker: 15 A
Plumbing Specification:
- 1/2" FPT Inlet
- Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent
- 3/4" FPT Outlet
- Minimum 1/4" Nominal ID Hard Pipe or Equivalent
- Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent
Utility Consumption:
- 4.9 kWh per 100 lbs @ 90/70
- 20 gal of Potable Water per 100 lbs @ 90/70
Operating Limits:
- Ambient Temp Range: 45 - 100°F
- Water Temp Range: 45 - 90°F
- Water Pressure: 10 - 113psig
- Voltage Range: 104 - 127V
- Heat Rejection: 4050 BTU/hr
- Refrigerant Charge: R-404A
- (12.3 oz. / 349 g)
Warranty
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
- Five Years: Parts warranty on Compressor, air-cooled condenser coil.
- Dimensions: 30" W x 28" D x 39" H
- Up to 265 lbs of ice produced per 24 hours
- Up to 100 lbs of built-in storage capacity (3.3ft3)
- Produces crescent shaped ice cubes
- Durable stainless steel exterior
- Front in, front out airflow
- EverCheck™ alert system
- CycleSaver™ design
- Ice bin opening is ADA compliant
- R-404A refrigerant (12.3 oz. / 349 g)
- Heat Rejection:4050 BTU/hr
- Ambient temperature range: 45 - 100°F
- Water temperature range: 45 - 90°F
- Water pressure: 10 - 113psig
- Voltage range: 104 - 127V
- 5.7 amps (15 Amp Max fuse)
- 4.9 kwh/100 lbs.@ 90/70
- Single phase, 115v/60/1, 6.5 ft cord with NEMA 5-15 plug
- Clean ice and easy maintenance lead to longer unit life span
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.
| Specifications | |
| Daily Ice Production | 265 lbs of Ice Daily |
| Electrical Specs | 115v/60/1 |
| Refrigerant | R-404A |
| Amps | 5.7 Amps |
| kWh | 4.9 kWh |
| Dimensions | |
| Height | 39" |
| Width | 30" |
| Depth | 28" |
| Weight | 195 lbs |
ADA Compliant
The Department of Justice (DOJ) published the Americans with Disabilities Act (ADA) Standards for Accessible Design in September 2010. These standards state that all electronic and information technology must be accessible to people with disabilities.
AHRI Certified
Widely recognized as the gold-standard for heating and cooling certification, AHRI provides an accurate and unbiased evaluation of heating, ventilation, air conditioning and commercial refrigeration (HVACR) equipment. With over 80 years’ experience certifying heating and cooling hardware, the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) is an internationally recognized certification standard. ANSI/AHRI standards benefit the HVAC and Refrigeration industry by ensuring the performance and efficiency of manufactured equipment is accurate and reliable.
CE Certified
The CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
UL Listed in US & Canada
This product meets UL safety standards in compliance with both Canadian and U.S. requirements.
Intertek ETL Sanitation Listed
The ETL Sanitation Mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to a periodic regimen of follow-up inspections to verify continued conformance. An ETL Sanitation Mark on Food Service Equipment indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
NSF Listed
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made in the USA
This product was made in America.
