Hoshizaki IM-200BAC Square Cuber Ice Maker, Air-Cooled, Built in Storage Bin, Undercounter

Model #IM-200BAC By Hoshizaki
$3,280.00
Save $3,280.00
$6,560.00

Free Shipping!

Ships in 24 - 48 Hours

The Hoshizaki IM-200BAC Square Cube Ice Maker

The IM-200BAC is capable of producing approximately 188 lbs of individual square cubes. The square cube shape melts very slowly, chilling beverages with very minimal dilution. This Air-cooled, Built in Storage Bin icemaker features Up to 75 lbs of built-in storage capacity (2.5ft3)*. The IM-200BAC is a Single phase, 115v/60/1, 5' 7/8" ft cord with NEMA 5-15 plug and uses R-404A refrigerant (10.6 oz. / 301 g). Min Clearance: 0" on top, 2" on rear & left side, 6" on right side. Or 2" at top and rear, 5/8" on left side, 6" on right side.. Please consult the Specification Sheet for additional details.*Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice. Replaces IM-200BAB.

Electrical Specification:

  • Single phase
  • 115v/60/1
  • 5' 7/8" ft cord with NEMA 5-15 plug
  • Amperage: 7.6
  • Max Fuse/HACR Breaker: 15 A

Plumbing Specification:

  • 1/2" FPT Inlet
  • Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent
  • 3/4" FPT Outlet
  • Minimum 3/4" Nominal ID Hard Pipe or Equivalent

Utility Consumption:

  • 8.4 kWh per 100 lbs @ 90/70
  • 22.5 gal of Potable Water per 100 lbs @ 90/70

Operating Limits:

  • Ambient Temp Range: 45 - 100°F
  • Water Temp Range: 45 - 90°F
  • Water Pressure: 10 - 113psig
  • Voltage Range: 104 - 127V
  • Heat Rejection: 3420 BTU/hr
  • Refrigerant Charge: R-404A
  • (10.6 oz. / 301 g)

Warranty

  • Three Years: Parts & Labor warranty on entire machine.
  • Five Years: Parts warranty on Compressor, air-cooled condenser coil.
  • Dimensions: 39-1/2" W x 23-5/8" D x 33- 1/2 " H
  • Up to 188 lbs of ice produced per 24 hours
  • Up to 75 lbs of built-in storage capacity (2.5ft3)
  • Produces individual square cubes
  • Durable stainless steel exterior
  • Front in, front out airflow
  • EverCheck™ alert system
  • Each cube is made individually by a dedicated jet spray
  • Min Clearance: 0" on top, 2" on rear & left side, 6" on right side. Or 2" at top and rear, 5/8" on left side, 6" on right side.
  • R-404A refrigerant (10.6 oz. / 301 g)
  • Heat Rejection:3420 BTU/hr
  • Ambient temperature range: 45 - 100°F
  • Water temperature range: 45 - 90°F
  • Water pressure: 10 - 113psig
  • Voltage range: 104 - 127V
  • 7.6 amps (15 Amp Max fuse)
  • 8.4 kwh/100 lbs.@ 90/70
  • Single phase, 115v/60/1, 5' 7/8" ft cord with NEMA 5-15 plug
  • Clean ice and easy maintenance lead to longer unit life span
  • Three Years: Parts & Labor warranty on entire machine.
  • Five Years: Parts warranty on Compressor, air-cooled condenser coil.
Specifications
Daily Ice Production 188 lbs of Ice Daily
Electrical Specs 115v/60/1
Refrigerant R-404A
Amps 7.6 Amps
kWh 8.4 kWh
Dimensions
Height 33 1/2"
Width 39 1/2"
Depth 23 5/8"
Weight 45.5 lbs
AHRI Certified AHRI Certified

Widely recognized as the gold-standard for heating and cooling certification, AHRI provides an accurate and unbiased evaluation of heating, ventilation, air conditioning and commercial refrigeration (HVACR) equipment. With over 80 years’ experience certifying heating and cooling hardware, the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) is an internationally recognized certification standard. ANSI/AHRI standards benefit the HVAC and Refrigeration industry by ensuring the performance and efficiency of manufactured equipment is accurate and reliable.

>CE Certified CE Certified

The CE marking is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.

UL Listed in US & Canada UL Listed in US & Canada

This product meets UL safety standards in compliance with both Canadian and U.S. requirements.

NSF Listed NSF Listed

This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Made in the USA Made in the USA

This product was made in America.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

 

You recently viewed

Clear recently viewed
}