Hoshizaki DKM-500BAJ Crescent Cuber Ice Maker, Air-Cooled, Serenity Series, Hotel & Motel

Model #DKM-500BAJ By Hoshizaki
$6,485.00
Save $6,485.00
$12,970.00

Free Shipping!

Ships in 24 - 48 Hours

The Hoshizaki DKM-500BAJ Crescent Cube Ice Maker

The DKM-500BAJ is capable of producing approximately 545 lbs of Crescent Cube style ice cubes per day, and the built-in dispensing system holds up to 140 lbs in insulated storage* to ensure you always have enough ice on hand! This commercial Air-cooled icemaker is the only one-piece dispenser design on the market! This makes it easy to install and service, and a quiet operating system makes it ideal for use in hotels and similar applications. Ice dispensing height is ADA compliant and is Protected by H-GUARD Plus Antimicrobial Agent. This sanitary icemaker/dispenser features a user-friendly dispensing mechanism that allows clean, individual, crescent ice cubes to be dispensed with a simple push of a button. This model features CycleSaver™ design and is ENERGY STAR® qualified. The DKM-500BAJ requires a Single phase, 115v/60/1, 8 ft cord with NEMA 5-15 plug electrical connection and comes with a cord and plug. Please consult the Specification Sheet for additional details.*Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice.

Electrical Specification:

  • Single phase
  • 115v/60/1
  • 8 ft cord with NEMA 5-15 plug
  • Amperage: 13.5
  • Max Fuse/HACR Breaker: 20 A

Plumbing Specification:

  • 1/2" FPT Inlet
  • Minimum 1/4" Nominal ID Copper Water Tubing or Equivalent
  • 3/4" FPT x2 Drain
  • Minimum 3/4" Nominal ID Drain Hard Pipe or Equivalent

Utility Consumption:

  • 5.56 kWh per 100 lbs @ 90/70
  • 16.6 gal of Potable Water per 100 lbs @ 90/70

Operating Limits:

  • Ambient Temp Range: 45 - 100°F
  • Water Temp Range: 45 - 90°F
  • Water Pressure: 10 - 113psig
  • Voltage Range: 104 - 127V
  • Heat Rejection: BTU/hr
  • Refrigerant Charge: R-404A
  • ( 1 lbs. 12.2 oz. / 800 g)

Warranty

  • Three Years: Parts & Labor warranty on entire machine.
  • Five Years: Parts warranty on Hermetic compressor, air-cooled fin and tube type condenser.
  • Dimensions: 30" W x 28" D x 77" H
  • Up to 545 lbs of ice produced per 24 hours
  • Up to 140 lbs of built-in storage capacity (6.7ft3)
  • Push button operated, 13 lbs of crescent cube ice\min
  • Durable, attractive one piece stainless steel exterior
  • Push button operated, 13 lbs of ice\min
  • Ice dispensing height is ADA compliant
  • CycleSaver™ design
  • Protected by H-GUARD Plus Antimicrobial Agent
  • R-404A refrigerant ( 1 lbs. 12.2 oz. / 800 g)
  • Heat Rejection: BTU/hr
  • Ambient temperature range: 45 - 100°F
  • Water temperature range: 45 - 90°F
  • Water pressure: 10 - 113psig
  • Voltage range: 104 - 127V
  • 13.5 amps (20 Amp Max fuse)
  • 5.56 kwh/100 lbs.@ 90/70
  • Single phase, 115v/60/1, 8 ft cord with NEMA 5-15 plug
  • ENERGY STAR® qualified
  • Three Years: Parts & Labor warranty on entire machine.
  • Five Years: Parts warranty on Hermetic compressor, air-cooled fin and tube type condenser.
Specifications
Daily Ice Production 545 lbs of Ice Daily
Electrical Specs 115v/60/1
Refrigerant R-404A
Amps 13.5 Amps
kWh 5.56 kWh
Dimensions
Height 77"
Width 30"
Depth 28"
Weight 300 lbs
ADA Compliant ADA Compliant

The Department of Justice (DOJ) published the Americans with Disabilities Act (ADA) Standards for Accessible Design in September 2010. These standards state that all electronic and information technology must be accessible to people with disabilities.

UL Listed in US & Canada UL Listed in US & Canada

This product meets UL safety standards in compliance with both Canadian and U.S. requirements.

Energy Star Energy Star

ENERGY STAR is the trusted, government-backed symbol for energy efficiency helping us all save money and protect the environment through energy-efficient products and practices. The ENERGY STAR label was established to: Reduce greenhouse gas emissions and other pollutants caused by the inefficient use of energy; and Make it easy for consumers to identify and purchase energy-efficient products that offer savings on energy bills without sacrificing performance, features, and comfort.

NSF Listed NSF Listed

This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Made in the USA Made in the USA

This product was made in America.

We pride ourselves for...

Our technical support expertise

Our team is trained to help you from the moment you receive your delivery. Whether it's assembly, installation, or general technical support, our specialists are here to make sure you get the most out of your product. We offer technical support to all of our customers. Please try to have your order number ready when you call.

Our friendly customer service

When you call us or email us, there is always someone on the other end with a smile on their face; ready to help you with whatever you need. You can call us for anything like general questions about placing an order to specific questions about product features and details, or even if you need us to help you put in a warranty claim; we're here to help.

Being fulfillment professionals

We understand how important it is for you to get your order delivered on time. Therefore, we use some of the best tools and systems to make sure your order process goes smooth and your products arrive on time. We know that time is one of the most valuable assets a business has and we don't take that lightly.

Making our customers happy!

It feels good knowing that we make our customers happy. So how do we do it? Simple. Our goal is to provide a service as opposed to just selling a product. We want to make sure that you have all of the support that you need from before you place your order and for the duration of the time you use your products. Not only that, but we aim to become your back end support system for all of your equipment and supplies needs. We're here for you.

 

You recently viewed

Clear recently viewed
}